Parameter:
Total harmonic Distortion: <0.01 10W/8Ω
Frequency Response: 10Hz-160KHz (-3dB)
Conversion Rate: 25V/uS
Signal to noise ratio: >95dB
Gain: 40 times
Size with heat sink: 260mm × 120mm × 80mm × 2
Weight: about 570g
Channel: 2
Output power: 500W8Ω：1000W/4Ω
Impedance: 4Ω 8 Ω
Supply Voltage:
DC ±20V to ±100V, the transformer output is AC voltage, AC voltage needs to be rectified and filtered and input to the power amplifier board.
Speaker protection power supply AC9V-15V (AC single voltage), the transformer output is directly input.
Effective Output Power:
500W/8Ω (±95V power supply) 1000W/4Ω (±95V power supply) 1000W/2Ω (±65V power supply). The 2Ω load is recommended not to
exceed ±65V. The power supply output power is basically determined by the power supply voltage and the horn impedance. The lower the
voltage is used, the smaller the power.
Note:
The matching capacitor on the board has a withstand voltage of 80V and cannot be used under overpressure. If you need to use voltage
above 80V, please replace the capacitor with 100V or more.
Package:
1* Stage Power Amplifier Board Fever Amplifier Board 1000W High Power Amplifier
