Specification:
Output Power: 120W/240W/1500W
Temperature Range:-50~110°C
Temperature Control Range:-50~110°C
Temperature Measurement Accuracy:±0.2 °C
Temperature control Accuracy:±0.1 °C
Output Type: Direct Output
Measurement Input: NTC10K L=1m Water Proof Probe
Mounting Hole Distance:73mm
Introduction To Code And Features:
1, P0 represents the starting temperature, the setting range is -50~110 °C, the factory setting is 25
2, P0 stands for stop temperature, setting range -50~110°C, factory setting 40
3, P0 stands for temperature correction, setting range -10~10°C, factory setting 0
4, P0 stands for delayed start, the setting range is 0~10 minutes, and the factory setting is 0 minutes.
Application Examples:
1. Start temperature
2. Start temperature > stop temperature = cooling mode
Common Fault Analysis:
1. How to restore the factory settings: When power is on, press and hold the up and down keys for about 3 seconds, display 888 and then jump to the detection temperature, and restore the factory settings successfully.
2. Display LLL: need to repair the sensor or replace the sensor
3. Display HHH: Sensor short circuit
Package:
1*Digital Thermostat Temperature
