×
Login Form
×
Registration
Profile Informations
Login Datas
or login
Details
Specification:
Output Power 100mw
Wavelength 650nm
Working Voltage 3.0V-3.7V
Working Current 200mA
Working Temperature -10 ℃~＋40 ℃
Laser Shape Dot
Lens diameter 7mm
Bronze Lens Holder M9X0.5 or M8x0.5 (optional depending on the type of laser housing/host/casing that you use)
bigger Bronze Lens Holder: Optional (required or not required)
Feature:
Something buyer need to know: 1. This laser module with lens and lens holders is one complete set of module and accessories for red laser pointers (torch type) DIY of different types of host/casing/housing of laser pointers in our shop (GD-301 type, 320 type, 300 type, 300A type, 310 type, 350 type mainly).
2. The suitable battery is 1x 18650 3.7v battery or 1x 16340 battery depending on different types of host of lasers.
3. Please wear 650nm laser protection goggles to protect your eyes when working on this module.
4. If you are going to assemble GD-301 Type laser, you need to have all four parts as shown in the picture, if you assemble 320 type, 300 type, 300A type, 310 type, 350 type, you don't need the bigger bronze lens holder which is the first right part as shown in the picture below , so we will send only the correct parts for you to assemble lasers according to the laser housing that you choose
5. So sometimes the parts you receive might not be the exactly the same as shown in the picture. Please understand and contact us if you have any techincal question when assembing the laser.
Package:
1 x 650nm 100mW Red Laser Diode Module w/ Colliminating Lens and Lens Holder
Output Power 100mw
Wavelength 650nm
Working Voltage 3.0V-3.7V
Working Current 200mA
Working Temperature -10 ℃~＋40 ℃
Laser Shape Dot
Lens diameter 7mm
Bronze Lens Holder M9X0.5 or M8x0.5 (optional depending on the type of laser housing/host/casing that you use)
bigger Bronze Lens Holder: Optional (required or not required)
Feature:
Something buyer need to know: 1. This laser module with lens and lens holders is one complete set of module and accessories for red laser pointers (torch type) DIY of different types of host/casing/housing of laser pointers in our shop (GD-301 type, 320 type, 300 type, 300A type, 310 type, 350 type mainly).
2. The suitable battery is 1x 18650 3.7v battery or 1x 16340 battery depending on different types of host of lasers.
3. Please wear 650nm laser protection goggles to protect your eyes when working on this module.
4. If you are going to assemble GD-301 Type laser, you need to have all four parts as shown in the picture, if you assemble 320 type, 300 type, 300A type, 310 type, 350 type, you don't need the bigger bronze lens holder which is the first right part as shown in the picture below , so we will send only the correct parts for you to assemble lasers according to the laser housing that you choose
5. So sometimes the parts you receive might not be the exactly the same as shown in the picture. Please understand and contact us if you have any techincal question when assembing the laser.
Package:
1 x 650nm 100mW Red Laser Diode Module w/ Colliminating Lens and Lens Holder
