×
Login Form
×
Registration
Profile Informations
Login Datas
or login
Details
Product Parameters:
Parameters:
Wave Length: 532nm.
Power: 200mW.
Working Current: 220-320MA
Working Voltage: 2.8-3.7 V
Customizable Voltage 4.5-32V
Working Temperature: +20 ° C ~ +30 ° C.
Storage Temperature: -10 ° C ~ +60 ° C.
Dimensions: 30 × 13mm (circuit board 16x11) mm total length: 46mm
Working Life: More Than 6000 H
Working Time: If it is equipped with laser rack, the voltage is stable and can be continuously bright.
Use:
Products are widely used in various types of laser stage lights, laser pointers / laser flashlights, laser positioning, range finder, medical
equipment, electronic production enthusiasts DIY, various industrial signs, locators, industrial equipment and equipment, laser
instructions, teaching Test light source, laser light source for demonstration, etc.
Note:
1. The outer casing is positive. It can't be placed directly in the place where there is iron. If it is burnt, please use electric tape.
2. It is normal when the power is on, it is normal, because the weather changes are preheated, the outer casing is positive.
3. With the heat sink can be continuously bright, if it is not equipped with about 2 minutes, it will become darker.
Package:
1* Laser Module
Parameters:
Wave Length: 532nm.
Power: 200mW.
Working Current: 220-320MA
Working Voltage: 2.8-3.7 V
Customizable Voltage 4.5-32V
Working Temperature: +20 ° C ~ +30 ° C.
Storage Temperature: -10 ° C ~ +60 ° C.
Dimensions: 30 × 13mm (circuit board 16x11) mm total length: 46mm
Working Life: More Than 6000 H
Working Time: If it is equipped with laser rack, the voltage is stable and can be continuously bright.
Use:
Products are widely used in various types of laser stage lights, laser pointers / laser flashlights, laser positioning, range finder, medical
equipment, electronic production enthusiasts DIY, various industrial signs, locators, industrial equipment and equipment, laser
instructions, teaching Test light source, laser light source for demonstration, etc.
Note:
1. The outer casing is positive. It can't be placed directly in the place where there is iron. If it is burnt, please use electric tape.
2. It is normal when the power is on, it is normal, because the weather changes are preheated, the outer casing is positive.
3. With the heat sink can be continuously bright, if it is not equipped with about 2 minutes, it will become darker.
Package:
1* Laser Module
