×
Login Form
×
Registration
Profile Informations
Login Datas
or login
Details
Specification:
This is a shield board with nokia 6100 LCD.
This 128x128 mini color LCD is a perfect match for the portable application. It is designed to repalce a broken screen in a cell phone. So the connector was not designed for multiple attachment/detachment. Please be gentle and handle with care.
This inexpensive LCD comes with a powerful white LED backlight and a relatively simple serial interface. It's a 9-bit interface, so beware. But we were able to get the LCD up and running on a LPC2138 with a few hours worth of work.
Frame Dimensions:1.35x1.58"
Active Display Dimensions:1.2"x1.2"
Specification:
LCD Logic - 3.3V @ 2-3mA
LED Backlight - 7V @ 40-50mA (very bright)
Full 4,096 Color Display
Uses thePhilips PCF8833Controller
Documents::
Latest LPC2148example code from SFE, works with both controllers
Latest ATmega8 examplecode from SFE, works with Epson controller
Interface tutorial
Epson ControllerDatasheet
SFE Eagle Libraryhas this part!
Theholy grail forum postingfor this Nokia type LCD
Example Pixel Control of LCD
Example Parallax Stamp BS2 Code
Example ATMega32 Code
Example SAM7-P64 ARM Code
Example 3D Graphics projecton a PIC
Example ATMega644/128/32/16 code
Example Gumstix Interface
Example PIC 16F87x codefor CCS Compiler
Example PIC 18F4550 USB
Example 4096 Color Control
Example Linux Driver
Example Image Converter
Bit map Converter
mbed Example
Pin Out (use the numbering visible on the display connector)::
VCC-Digital (3.3V)
RESET
SDATA
SCK
CS
VCC-Display (3.3V)
N/C
GND
LED GND
LED V+ (6-7V)
Technical support:
manual Sample Arduino Code
Note:
You need to change the code into the Philips drive.
arduino code library that contains two drive EPSON and PHILLIPS, choose to use, you can adjust the parameters for the dark color and light in the code. Toning without the use of keys. Our LCD chip using PHILLIPS choose in your code:
Choose one of them, the starting position and orientation of the four pictures to choose from.
// For a Phillips Screen:
// This
graphic.begin (0,0,0, PHILLIPS_0); // Normal X direction
// or
//graphic.begin(0,0,0,PHILLIPS_1); // Revesed X direction.
// or
//graphic.begin(0,0,0,PHILLIPS_2); // Normal X direction, Mirrored.
// or
//graphic.begin(0,0,0,PHILLIPS_3); // Revesed X direction, Mirrored.
graphic.Contrast (0x3F); // make the color clear, clear,> 0x30
You can see this after you run the code on your arduino.
Items package:
Color Image LCD empty Shield*1
Nokia 6100 LCD*1
This is a shield board with nokia 6100 LCD.
This 128x128 mini color LCD is a perfect match for the portable application. It is designed to repalce a broken screen in a cell phone. So the connector was not designed for multiple attachment/detachment. Please be gentle and handle with care.
This inexpensive LCD comes with a powerful white LED backlight and a relatively simple serial interface. It's a 9-bit interface, so beware. But we were able to get the LCD up and running on a LPC2138 with a few hours worth of work.
Frame Dimensions:1.35x1.58"
Active Display Dimensions:1.2"x1.2"
Specification:
LCD Logic - 3.3V @ 2-3mA
LED Backlight - 7V @ 40-50mA (very bright)
Full 4,096 Color Display
Uses thePhilips PCF8833Controller
Documents::
Latest LPC2148example code from SFE, works with both controllers
Latest ATmega8 examplecode from SFE, works with Epson controller
Interface tutorial
Epson ControllerDatasheet
SFE Eagle Libraryhas this part!
Theholy grail forum postingfor this Nokia type LCD
Example Pixel Control of LCD
Example Parallax Stamp BS2 Code
Example ATMega32 Code
Example SAM7-P64 ARM Code
Example 3D Graphics projecton a PIC
Example ATMega644/128/32/16 code
Example Gumstix Interface
Example PIC 16F87x codefor CCS Compiler
Example PIC 18F4550 USB
Example 4096 Color Control
Example Linux Driver
Example Image Converter
Bit map Converter
mbed Example
Pin Out (use the numbering visible on the display connector)::
VCC-Digital (3.3V)
RESET
SDATA
SCK
CS
VCC-Display (3.3V)
N/C
GND
LED GND
LED V+ (6-7V)
Technical support:
manual Sample Arduino Code
Note:
You need to change the code into the Philips drive.
arduino code library that contains two drive EPSON and PHILLIPS, choose to use, you can adjust the parameters for the dark color and light in the code. Toning without the use of keys. Our LCD chip using PHILLIPS choose in your code:
Choose one of them, the starting position and orientation of the four pictures to choose from.
// For a Phillips Screen:
// This
graphic.begin (0,0,0, PHILLIPS_0); // Normal X direction
// or
//graphic.begin(0,0,0,PHILLIPS_1); // Revesed X direction.
// or
//graphic.begin(0,0,0,PHILLIPS_2); // Normal X direction, Mirrored.
// or
//graphic.begin(0,0,0,PHILLIPS_3); // Revesed X direction, Mirrored.
graphic.Contrast (0x3F); // make the color clear, clear,> 0x30
You can see this after you run the code on your arduino.
Items package:
Color Image LCD empty Shield*1
Nokia 6100 LCD*1
