×
Login Form
×
Registration
Profile Informations
Login Datas
or login
Details
Specification:
Megatronics is based on many famous open-source products including:
Arduino Mega 2560, RAMPS, SD Ramps.
Therefor this product is an already proven design.
It combines all major features of these board into a single board solution for more reliable 3D-printing.
Feature:
Megatronics has a powerful Atmega2560 processor with 256 kB memory,
running at 16Mhz. The board can be connected to a PC using a normal USB cable.
It will register as FTDI FT232R device.
The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE
The board is supplied with a Marlin firmware.
Because of the continued development and your specific needs,
changes are you want to upload another firmware.
You can use Arduino IDE to upload firmware to the Megatronics board. Under Linux select as board 'Arduino Mega 2560 or Mega ADK'.
Under other operating systems the USB will not be reset correctly and you will need to adjust the boards
Package:
1 x 3D printer RepRap Stepper Motors Megatronics V2.0 Motherboard Driver
Megatronics is based on many famous open-source products including:
Arduino Mega 2560, RAMPS, SD Ramps.
Therefor this product is an already proven design.
It combines all major features of these board into a single board solution for more reliable 3D-printing.
Feature:
Megatronics has a powerful Atmega2560 processor with 256 kB memory,
running at 16Mhz. The board can be connected to a PC using a normal USB cable.
It will register as FTDI FT232R device.
The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE
The board is supplied with a Marlin firmware.
Because of the continued development and your specific needs,
changes are you want to upload another firmware.
You can use Arduino IDE to upload firmware to the Megatronics board. Under Linux select as board 'Arduino Mega 2560 or Mega ADK'.
Under other operating systems the USB will not be reset correctly and you will need to adjust the boards
Package:
1 x 3D printer RepRap Stepper Motors Megatronics V2.0 Motherboard Driver
