×
Login Form
×
Registration
Profile Informations
Login Datas
or login
Details
Specification:
Circuit control: APC
Dimensions: 8x20mm (W * L)
Power Supply: 3.0-5.0VDC
Output Power: 1-200mw
Feature:
Please weld the 3 pins of LD to the PCB board.
The red wire on the PCB is positive +, black wire on the PCB is negative -, connect both wires to a 3-5V DC power supply, use potentiometer to adjust the output power of the laser diode.
The circuit will automatically control the output power of the LD.
If the laser diode's operation current is very small, please first adjust the potentiometer to the smallest current before connecting to the power suply.
Please make sure the you use enough cooling when operating on the Laser diodes.
Package:
2 x 635nm 650nm 780nm 1-20mw N-type Pin Laser Diode LD APC Driver Circuit Board PCB Constant Power
Circuit control: APC
Dimensions: 8x20mm (W * L)
Power Supply: 3.0-5.0VDC
Output Power: 1-200mw
Feature:
Please weld the 3 pins of LD to the PCB board.
The red wire on the PCB is positive +, black wire on the PCB is negative -, connect both wires to a 3-5V DC power supply, use potentiometer to adjust the output power of the laser diode.
The circuit will automatically control the output power of the LD.
If the laser diode's operation current is very small, please first adjust the potentiometer to the smallest current before connecting to the power suply.
Please make sure the you use enough cooling when operating on the Laser diodes.
Package:
2 x 635nm 650nm 780nm 1-20mw N-type Pin Laser Diode LD APC Driver Circuit Board PCB Constant Power