×
Login Form
×
Registration
Profile Informations
Login Datas
or login
Details
Specification:
The CY14443A Series RF reader module based on the ISO14443 standard non-contact card reader chip
using 0.6 micron CMOS EEPROM process to ISO14443 typeA protocol support for MIFARE standard encryption algorithm.
Inside the chip highly integrated analog modulation and demodulation circuit,
just the least amount of peripheral circuits can support the UART interface (-C),
the I2C interface (-U), or SPI interface (-P) digital circuits with TTL,CMOS two voltage mode.
Particularly suitable for the application of the ISO14443 standards, water, electricity, gas meters,
vending machines, access control, elevators,
drinking fountains, telephones and other billing systems or the identification system reader.
Users do not have a complex control of the radio base stations simply by selecting the UART or the IIC or SPI interface to send commands to the card with fully
CY-14443A Series support Mifare One S50 is S70, the Ultra Light, Mifare Pro, FM11RF08 and other compatible cards.
Can be set to automatically find the card, the default case for automatically searching card
CY-14443A is a low-power consumption wide voltage function modules,
work 3 to 5.5V, the lowest power consumption of only 3ua integration module can greatly reduce the PCB area,
and enhance application performance, capable of a variety of
Applications
1.CY-14443A-T module external antenna
2.An increase 4kBits EEPROM, the EEPROM byte address from 0x00 to 0x1FF
3.You can read the PCD, PN, SN
Feature:
1.UART serial interface
2.Automatically senses the cards close to the antenna area, and generate an interrupt signal
3.Highly integrated ISO14443A reader chips, support for MIFARE standard encryption algorithm
4.Both with TTL / CMOS voltage mode of operation, the operating voltage to 5.5V
5.Industrial-grade high-performance processor, built-in hardware watchdog, with high reliability
6.Anti-jamming processing and excellent EMC performance
7.simplify the complexities underlying card operating as several simple commands
8.Maximum area: 2-8cm
Package:
1 x RFID RF Module
The CY14443A Series RF reader module based on the ISO14443 standard non-contact card reader chip
using 0.6 micron CMOS EEPROM process to ISO14443 typeA protocol support for MIFARE standard encryption algorithm.
Inside the chip highly integrated analog modulation and demodulation circuit,
just the least amount of peripheral circuits can support the UART interface (-C),
the I2C interface (-U), or SPI interface (-P) digital circuits with TTL,CMOS two voltage mode.
Particularly suitable for the application of the ISO14443 standards, water, electricity, gas meters,
vending machines, access control, elevators,
drinking fountains, telephones and other billing systems or the identification system reader.
Users do not have a complex control of the radio base stations simply by selecting the UART or the IIC or SPI interface to send commands to the card with fully
CY-14443A Series support Mifare One S50 is S70, the Ultra Light, Mifare Pro, FM11RF08 and other compatible cards.
Can be set to automatically find the card, the default case for automatically searching card
CY-14443A is a low-power consumption wide voltage function modules,
work 3 to 5.5V, the lowest power consumption of only 3ua integration module can greatly reduce the PCB area,
and enhance application performance, capable of a variety of
Applications
1.CY-14443A-T module external antenna
2.An increase 4kBits EEPROM, the EEPROM byte address from 0x00 to 0x1FF
3.You can read the PCD, PN, SN
Feature:
1.UART serial interface
2.Automatically senses the cards close to the antenna area, and generate an interrupt signal
3.Highly integrated ISO14443A reader chips, support for MIFARE standard encryption algorithm
4.Both with TTL / CMOS voltage mode of operation, the operating voltage to 5.5V
5.Industrial-grade high-performance processor, built-in hardware watchdog, with high reliability
6.Anti-jamming processing and excellent EMC performance
7.simplify the complexities underlying card operating as several simple commands
8.Maximum area: 2-8cm
Package:
1 x RFID RF Module
