Based in Wuhan, Central China Hubei Province, Lilly Electronics is engaged in fabrication, sales and R&D of consumer electronics maninly in the industry of Laser, IC and LED! You are welcome to visit us for culture exchange and mutrual business development and progress.
Product Description:
1. Relative humidity and temperature integrated measurement
2. Accurate dew point measurement
3. Full-scale calibration, without re-calibration can be used interchangeably
4. Two-wire digital interface (the most simple system integration, lower prices)
5. Ultra-small size (7.5 × 5 × 2.5 mm)
6. High reliability (industrial CMOS process)
7. Long-term stability of the optimized
8. Based on-demand detection, and therefore low energy consumption
9. Self-test capability with the humidity sensor element
10. The sensor element heating applications can be obtained very high accuracy and stability of full scale calibration.
Parameters:
1. Humidity measuring range: 0 to 100% RH
2. Humidity measurement accuracy: ± 4.5% RH (20% to 80% RH)
3. Humidity measurement reproducibility: ± 0.1% RH
4. Humidity Measurement Resolution: 0.03% RH
5. The temperature measuring range: -40 ~ +123.8 ℃;
6. Temperature measurement accuracy: ± 0.5 ℃ at 25 ℃; ± 0.9 ° C (0 to 40 ℃)
7. Temperature response time: ≤ 20 seconds
8. Temperature measurement repeatability: ± 0.1 ℃
9. Temperature Measurement Resolution: 0.01 ℃
6. Set PIO11 HIGH with a 10K resistor in between.
7. Power on, module comes into AT Command Response Status
8. Open HyperTerminal or other serial tool, set the baud rate 38400, 8 data bits, 1 stop bit, no parity bit, no Flow
Application:
1. Data acquisition
2. the transmitter
3. the automated process control
4. automotive industry
5. building control & HVAC
6. electrical room
7. Measurement and Testing
8. the pharmaceutical industry
