Specification:
1. 2.4G wireless DMX512 reciever and transformer module
2. can be installed in LED lighting
3. three color LED indicator
4. standard DMX512 data. transform data between lightings
5. 126 channel auto control
6. 7 group ID setting
7. input voltage: 5vdc
8. frequency: 2.4G ISM, 126 channel
9. max transformer output: 20dBm
10. receive sensitivity: -94dBm
11. interface: RS485/cpu uart
Manuel::
1. ID code for LED color:
1) RED
2) GREEN
3) RED+GREED=yellow
4) BLUE
5) RED+BLUE=violet
6) GREEN+BLUE
7) RED+GREED+BLUE=white
2. press the switch, it will show the ID setting now. the ID number will add 1 more when you add the switch for ID setting
3. working status：
LED lighting：no DMX or wireless signal
red led flicking：signal transforming
green LED flicking：signal recieving
4. frequency- - - - - - - - - - - - - - - - - - 2. 400-2. 525 G, auto setting 126 channels
5. ID code- - - -“1-7”ID code，press key to adjust it. only the same ID code can communicate.
Buiding communication：
1. add the 5v power on it
2. press KEY and set the ID to the same.
3. the red LED will be flicking till it find the same ID code. then the green LED begins to flick. if there is no ID the same, the red LED will be always flick. the quick the DMX signal is, the fast the LED flicks.
4. communicate successfully.
note: leave me email address when you pay and gmail address recommended. I will send the document to you.
Package:
1pc DMX512 Wireless Receiver Transformer Module Lighting Control
