Based in Wuhan, Central China Hubei Province, Lilly Electronics is engaged in fabrication, sales and R&D of consumer electronics maninly in the industry of Laser, IC and LED! You are welcome to visit us for culture exchange and mutrual business development and progress.
2PCS CC1100 433Mhz SI4432 Wireless RF Transceiver Module with Antenna
Product Description :
Operating voltage: 1.8V ~ 3.6V (recommended 3.3V)
Working frequency band ISM 433M
Maximum rate of 500kbps, support for 2-FSK, GFSK and MSK modulation.
Setup softwafe can modify Rate, Power, Frequency.
High sensitivity (1.2Kbps under-110dBm, 0.1% packet error rate)
Built-in hardware CRC error detection, and address control.
Lower current consumption (RX , 15.6mA, 2.4Kbps, 433MHz).
Programmable control of output power, up to +10 dBm.
Wireless wake-up functionality to support low-power electromagnetic activation, wireless wake-up low-power sleep state of the equipment.
Support the transmission channel before the auto-clean-up visits (CCA), Carrier Sense System.
Fast frequency changes brought about by a suitable synthesizer frequency hopping system.
Module can be software-based address, software programming is very convenient.
Standard 2.0mm DIP spacing interfaces for embedded applications.
Separate 64-byte RX and TX data FIFO.
Transmission Distance: open to the actual transmission distance 250-300 meters (depending on the specific situation of the environment and communication baud rate settings.">
Package:
<2pc CC1100 433Mhz SI4432 Wireless RF Transceiver Module
2pcs antennas
Note: This module needs 3.3V power supply.Each module can send and receive data,only when you have at least two module,they could work.
Only For Professional
">
1pc Arduino Dual H-bridge DC Motor Driver Board
